
Operation Fyrite
INSIGHT
Plus Manual
78 0024-9487 Rev 2
Step Example Procedure for Taking Ambient CO Measurements
3
If using battery power, check battery status. If battery life is
questionable, replace the batteries, as the Ambient CO test takes
approximately 15 minutes to complete.
4
Move instrument to target location to be tested.
5
Press F2 to display the Main Menu.
6
Use the down arrow to highlight Ambient CO Test and press the
ENTER button.
7
Follow the on-screen instructions to initiate the test.
8
Refer to page 29 for details on navigating the ambient CO test
screens, viewing results, saving results to memory, and printing
results.
4.9. PC Interface and Fyrite
User Software
A PC with Fyrite
User Software (FUS) installed can set, edit, and transfer the
following:
• instrument time and date
• custom fuels
• test ID
• user name
• customer logo
• instrument setup
• calibration password
• B-SMART
code
• test records from the instrument’s memory
• firmware updates.
∇ ∇ ∇
Comentários a estes Manuais